Apr 30, 20152 min
The Viking V Crush shaft is an amazing product; this shaft is standard for all of Vikings break and jump cues. The shaft comes in a standard length of 29 inches, with a 13 millimeter phenolic tip. It has a 5/16/18 quick release pin, a Viking black phenolic ferrule, and a conical taper. This shaft has custom options you may also select when purchasing, such as tip diameter or shaft length.
I was given the task of reviewing this shaft, so I set out to test it on seven, eight, and nine foot tables, as well as testing it against other break cues. I started by breaking with this shaft on my Viking XRZR, on a seven foot Valley bar box table.
My first break I drained five balls—stripes, two solids—and had center table placement on the table. I quickly ran out after. In order to see if I could do any better, I did the same break with my Jester G-10 Assault break cue, which I use as my standard breaker. I got similar results with it, which to me is a good thing because I look at the Jester as one of the highest quality break cues.
Next were the eight and nine foot tables, and this shaft just didn’t care. It sold me. Bring it on. Time and again I dropped balls and got center table placement. It was so easy.
I’m actually at a point I don’t know which break cue to use, the Viking or the Jester. And for my break, the faster I can break the better, so with my Viking at 19 oz. and the Jester at 14oz., I thought there was no way they could compare.
The thing I like about the Viking, is that with the extra weight I can let the cue do the work instead of forcing myself to push through the cue ball. With my Jester the break is like a wild punch, smashing ball and giving ridiculous breaks—with the Viking, if I try to force it I lose all control.